Double Column High Speed Machining Centers HMC

1. The pneumatic system for balancing the spindle node.

The machine is equipped with a special pneumatic balancing system that prevents vibration.

The pneumatic circuit provides high air pressure, due to which a quick response of the balancing system is achieved.

The machine is equipped with an auxiliary source of air supply to correct the position of the balancing system, due to which the moment of balancing and stability of cutting increases.

2. Spindle with direct drive.

The spindle is directly brought into rotation by means of a cervical, which increases the stiffness of the spindle, reduces its vibration and increases the accuracy of processing.

The spindle is equipped with a through air supply system through a blowing spindle, which prevents dust accumulation.

Curtain of the coat

For an additional order, a built -in spindle or spindle with a belt drive is available.

3. Telescopic shields with a sliding mechanism of a scissor type.

Telescopic shields of axes X and Y are equipped with a sliding mechanism of a scissors type. This design provides a more uniform distribution of effort when moving telescopic shields. In addition, the smoothness of movement increases, the load on the engine decreases and the noise level decreases.

4. Washing system of high power chips.

The waterfish system works in three areas with 30 nozzles, so that the effectiveness of the chips increases significantly.

Thanks to this waterfish system, the temperature deformation of the workpiece is minimized.

5. Volumetric oil distributor.

The machine is equipped with a volumetric oil distributor with a volume of 8 liters with uniformly placed lubrication points to ensure uniform lubrication of the guides.

The ability to supply lubrication to individual lubrication points.

A sensor with feedback pressure is available.

6. The turning table.

The turning table is given in rotation by the corder, which provides quick and accurate positioning.

In the standard performance, the step of the table is 1 °.

According to the additional order, a table with a rotation step is 0.001 ° and 5 °.

7. The device of the automatic change of rotary type pallet.

A synchronized device of the automatic change of pallet allows you to load and unload the blanks during processing.

The Pallet automatic change system significantly saves loading and unloading time, which increases the productivity of the machine.

Pallet change time is 8-12 seconds.

The pallet is installed on 4 cones, so that high positioning accuracy is achieved.

8. The chain tool store for 40/60/90/120 tools.

The ASI tools store, driven by the Servigator, is equipped with a tool for preliminary tuning the tool and instrumental nests, which achieves a quick and accurate change in the tool.

The store in standard design contains up to 40 tools.

For an additional order, stores for 60, 90 and 120 tools are available.

The choice of the tool is carried out in both directions, as well as arbitrarily.